Home MyAdvantech Country / Region [ Change ]
You are here: Home > Embedded Boards > COM.0-R.2.0

Advantech announces a new series of COM modules that support the new COM 2.0 specification. The newly-introduced COM Express™ COM.0 Revision 2.0 by the PCI Industrial Computer Manufacturers Group (PICMG®) takes Computer-on-Modules into a new era with smaller footprints and expanded pin-outs.

COM.0 R.2.0 Specification Features
dot Up to three Digital Display Interface (DDI): HDMI, DisplayPort and SDVO
dot Increased PCI Express lanes, with additional high-speed I/O - USB 3.0 and SATA 3
dot Expanded functions for type 6 and type 10 pin-outs
 
Feature Comparison Table
The Computer on Module specification was adopted by PICMG in 2005. In Rev. 1.0, there were a total of 5 pin-outs (Type-1 to Type-5 pin out). As new technology evolved, the market demand grew for graphic performance, more bandwidth and faster I/O interface. Recently the PICMG group officially released revision 2.0 of the COM Express standard by adding two new pin-out types Type-6 and Type-10. Type-6 is based on Type-2 which is 2 connectors. Type-10 is based on Type-1 which is one connector. Revision 2.0 has adopted new technology such as USB 3.0, digital display interface (DDI) and more PCI Express lanes, and removed old interface such as IDE and PCI.

NOTE! Rev. 1.0 and Rev. 2.0 use the same connectors and form factors, however the pin-out definitions are different and difficult to distinguish from their appearance alone. Most customers are still using Rev. 1.0 carrier boards and therefore must pay close attention when adopting Rev.2.0 COM Modules for carrier boards designed for Rev. 1.0.
 
COM.0 R2.0 Type 2 and Type 6 V.S. COM.0 R1.0 Type 2
  Pin-out Type 2 Rev. 1.0 Pin-out Type 2 Rev. 2.0 Pin-out Type 6 Rev. 2.0
32-bit PCI Interface 1 1 -
IDE Port 1 1 -
PCI Express Lanes 22
(6 on row A-B)
(16 on row C-D)
22
(6 on row A-B)
(16 on row C-D)
24
(6 on row A-B)
(18 on row C-D)
SPI Interface - 1 Ports 1 Ports
USB 3.0 Interface - - 4 Ports
Digital Display Interface (DisplayPort, HDMI/DVI, SDVO) - - 3
TV Out Function 1 - -
Fan Speed Control - - 1
SDIO - - 1
General Purpose Serial Interface - - 2
VCC_12V pin on row A & B 12 pins 12 pins 12 pins
1. If Type 2 Rev. 2.0 COM plugs into a Type 2 Rev. 1.0 carrier boards: They should be fine except the TV-out function will not work and the SPI interface doesn’t exist on Rev. 1.0 carrier boards.
2a. If Type 6 Rev. 2.0 COM plugs into Type 2 Rev. 1.0 carrier boards: The COM might be damaged by VCC_12V (Row A pin-97 to 99 pin-101 to 103, and Row B pin-101 to 103).
2b. Advantech SOM-5890 is based on Rev. 2.0 Type-6 and has a protection circuit to prevent damage from VCC_12V. When plugged into Rev. 1.0 carrier boards: they should be fine, however several functions on the carrier board will not work, such as PCI and IDE interfaces designed for Rev. 1.0.
 
COM.0 R2.0 Type 1 and Type 10 V.S. COM.0 R1.0 Type 1
  Pin-out Type 1
Rev. 1.0
Pin-out Type 1
Rev. 2.0
Pin-out Type 10
Rev. 2.0
SATA / SAS Port 4 4 2
PCI Express Lanes 6 6 4
SPI Support - 1 1
24-bit LVDS 2 2 1
Digital Display Interface (DisplayPort, HDMI/DVI, SDVO) - - 1
TV Out Function 1 - -
Analog VGA Interface 1 1 -
Fan Speed Control - - 1
SDIO - - 1
General Purpose Serial Interface - - 2
VCC_12V pin on row A & B 21 pins 12 pins 12 pins
1. If Type 1 Rev. 2.0 COM plugs into Type 1 Rev. 1.0 carrier boards: They should be fine except the TV-out function will not work on Rev. 2.0 COM and the SPI interface doesn’t exist on Rev. 1.0 carrier boards.
2a. If Type 10 Rev. 2.0 COM plugs into Type 1 Rev. 1.0 carrier boards: The COM might be damaged by VCC_12V. If customers insist on it, the carrier board or CPU module must have a hardware modification for those VCC_12V pins.
2b. Advantech SOM-7564 is based on Rev. 2.0 Type-10 and has a protection circuit to prevent damage from VCC_12V when plugged into Rev. 1.0 Type-1 carrier boards.
 
 
Advantech COM Offering  
COM-Ultra COM-Express Compact COM-Express Basic Development Board
SOM-7564 SOM-6764 SOM-5890 SOM-DB5800
COM 2.0 Type 10 COM 2.0 Type 2 COM 2.0 Type 6 COM 2.0
dot Intel® Atom™ E6xx up to 1.6 GHz
dot 1 GB DDR2 memory on board
dot LVDS, SDVO
dot PCIe x1, GbE
dot Intel® Atom™ E6xx up to 1.6 GHz
dot 1 GB DDR2 memory on board
dot LVDS, SDVO, VGA
dot PCI, PCIe x1, GbE, SATA, PATA, USB
dot Operating temperature: -40 ~ 85°C
dot Intel® Core™ i7/i5/i3 processor + QM67
dot 18/24-bit 2-Ch. LVDS, HDMI, Displayport, VGA
dot Dual Ch. DDR3-1333 SO-DIMM sockets up to 16 GB
dot PEG, PCIe x1, SATAIII, USB 2.0, GbE
dot Supports COM 2.0 type 6
dot PEG, PCIe x4, PCIe x1
dot USB, SATA, GbE, SPI, LPC, SDIO
dot HDMI/DVI/DP, VGA, LVDS, SDVO

Built-in iManager utility and APIs improve hardware and software integration
Advantech iManager compliant with EAPI 1.0 standard